Please note: This update contains an update for the Softube plugin architecture, affecting all plug-ins. This means that if you save a project using this version, it will not be possible to downgrade to an earlier version of the plug-ins, nor share the project with someone using an earlier version of the plug-ins.
All products:
Improved loading times for all products. Measured up to 50% quicker loading times depending on plug-ins and HW used.
Reduced HW disk space needed for plug-ins after installation. Reducing HW disk space needed by 60-70%, depending on the plug-in/plug-ins installed.
Fixed an issue where the Extended Features output level only affected the left channel in Mono to Stereo instances.
Amp Room:
- Fixed the guitar tuner.
- Fixed crashes when importing legacy presets.
Bus Processor:
- Minor CPU optimisation.
Console 1 System:
Added support for the following Plugin Alliance plug-ins:
- SHAPE Section
- elysia karacter Mix
- elysia nvelope
- Black Box Analog Design HG-2
- EQ Section
- Brainworx bx_console AMEK 200
- Brainworx bx_console AMEK 9099
- Brainworx bx_console Focusrite SC
- Brainworx bx_console N
- Brainworx bx_console SSL 4000 E
- Brainworx bx_console SSL 4000 G
- Brainworx bx_console SSL 9000 J
- Dangerous Music BAX EQ
- elysia museq Mix
- Mäag Audio EQ2
- Mäag Audio EQ4
- COMPRESSOR Section:
- Brainworx bx_console AMEK 200
- Brainworx bx_console AMEK 9099
- Brainworx bx_console Focusrite SC
- Brainworx bx_console N
- Brainworx bx_console SSL 4000 E
- Brainworx bx_console SSL 4000 G
- Brainworx bx_console SSL 9000 J
- elysia alpha compressor Mix
- elysia mpressor
- Shadow Hills Mastering Compressor
- Shadow Hills Mastering Compressor Class A
- Added support for project tabs in Reaper.
- Updated the page table for Pro Tools.
- Improved RAM memory usage.
- Fixed graphical issues with EQ curve visualisations for third party plug-ins.
- Fixed a graphical issue with EQ curves in Pro Tools.
- Fixed a crash when loading a default preset including a third party plug-in.
- Fixed an issue in accessibility training mode where EQ type buttons had the wrong voiceover.
- Fixed an accessibility issue where the section presets menu had the wrong voiceover.
Console 1 Channel / Fader Mk III:
- Fixed an issue where disabled tracks in Cubase 14 was shown on the Fader Mk III.
- Fixed an issue where channel mutes were not displayed correctly on the HW.
- Fixed an issue when accessing Fader spill mode and fader trim mode when in favorite mode.
- MIDI modules now listen to incoming MIDI as well as sending it.
- Added possibility to map a custom MIDI map for Console 1 Fader Mk III. The map name is Console 1 Fader Midi Map.txt and you can find it in: Mac: ~/Library/Application Support/Softube/ , Windows: <Username>\AppData\Roaming\Softube\
Updated Channel MK III firmware to 19.0.1 and Fader Mk III 14.0.1:
- Fixes graphical issues on the HW screens.
Console 1 Core Mixing Suite:
- CPU optimisations for core FET and Bus compressors.
Dimensions:
- Fixed plate algorithm not processing the right input.
- Fixed pops and clicks in plate's modulation.
Drawmer 1976 Three Band Saturator:
- Fixed a wrongly scaled output meter.
FET Compressor Mk II:
- Major CPU optimisation.
Flow Mastering Suite:
- Fixed an issue where you could get a pop-up stating that you had missing plug-ins even though they were installed.
- Improved the look when you are moving modules.
- Fixed an issue where "add new subplugin" didn't follow OS scroll direction.
- Improved UX for module menu: escape one time deletes search, escape twice unfocuses the search bar.
Tape:
- Fixed a phase issue when blending wet and dry signals.
Valley People Dyna-Mite Slam & Gate:
- Fixed output meter scaling
Weiss Compressor/Limiter:
- Fixed an issue where Auto Release didn't work correctly.