Console 1 Mixing System

Direct DAW Control for Logic Pro

Logic Pro 10.7 and higher supports DAW Control for Console 1 through Apple’s Control Surface support. With this you can access track volume, pan, sends, solo and mute, for both tracks containing a Console 1 plug-in, as well as tracks without a Console 1 plug-in.

 

Installing DAW Control for Logic Pro is automatic and will only be required once. In some cases, for example when the computer network settings change, you might be required to do it again.

  1. Make sure the latest version of Console 1 is installed and that the “Console 1 On-Screen Display” application is running.
  2. Start Logic
  3. Logic will display a message: “OSC app “Console 1” on “Console 1 [computername] wants to connect to Logic Pro.”
  4. If there are several computers running Console 1 on your network, make sure that the message refers to your computer and press OK.

 

The Control Surface Setup Window should look something like this: 

If the Console 1 has not been added to Control Surface Setup, please try clicking "New" + "Automatic installation". That should make your Console 1 ask to connect again (you may need to restart the On-Screen Display application as well). 

You can read more about the integration in the Console 1 Mixing System Mk III manual