All plug-ins:
- The preset arrows (load previous and next preset in the plug-in window) are now available to screen readers (Mac only).
- Added VST3 snapshot images for all Softube plug-ins for display in the DAW.
- Fixed an issue causing Extended Features peak meters to show -80 dB instead of -inf when there is no signal.
- Fixed an issue causing all tags to be removed from a preset when removing one tag in Preset Collection Group Edit mode.
All HW:
- Added support for virtual MIDI ports on Mac and Windows. On Windows, virtual MIDI is off by default since Microsoft’s virtual MIDI implementation is still unstable. Virtual MIDI can be toggled on/off in the settings menu. This update means that DAW integrations that were previously only available for Mk III units are now available for all HW generations. The new virtual MIDI port is called “Softube OSD DAW”.
- Fixed an issue that could cause hardware units to disconnect erroneously.
Amp Room, Flow Mastering Suite, and Flow Mixing Suite:
- Fixed an issue that could cause discrete parameters to jump to random values when stepping through presets (VST3 only).
Console 1 System:
- Added support for FabFilter Pro-C 3, UADx 610 A, and UADx 610 B.
- The MIDI CC modules now save their values in projects and presets.
- Reduced DC offset in the Console 1 drive models.
- Fixed an issue that could cause parameters to be recalled incorrectly for Console 1 in Logic Pro.
Console 1 Compact:
- You can now browse through the compressor visualizations from the Console 1 Compact HW (the button without screenprint to the right of the screen).
- Fixed an issue causing Console Compact to not follow track selection from the DAW correctly when jumping across pages.
- Fixed an issue causing the On-Screen Display to show an erroneous low-power warning.
Console 1 Fader Mk III:
- New firmware for Console 1 Fader Mk III gives smoother motor control and more accurate fader positions. No more flying fader caps, fingers crossed.
- Fixed an issue which could cause the faders to move while the computer was asleep.
- Fixed an issue which could cause the faders to stop responding in HUI mode on Windows.
- Fixed an issue causing re-recording fader automation (a second pass) to write a wrong value when initiating a change.
- Fixed an issue causing faders in Fader MIDI mode to not move to incoming CC values.
Console 1 Fader Mk I:
- Fixed an issue that could cause a second Console 1 Fader Mk I unit to be unrecognized on Windows.
Fix Phaser:
- Fixed an issue causing Fix Phaser to report the wrong latency in Amp Room and Flow Mixing Suite.
Flow Mixing Suite:
- Added third-party plug-in support. This is the list of currently supported curated VST3 plug-ins (see list of supported 3rd-party plug-ins).
- The new Softube Plug-in Scanner is installed with Flow Mixing Suite. It finds the supported plug-ins on your computer. Scanning carries on in the background, so you can close the window while it scans. There’s a beta-setting available that allows for scanning all available third-party VST3 plug-ins.
- Added Single Plug-in Flows for all supported third-party VST3 plug-ins, as well as all Softube plug-ins available in Flow Mixing Suite. The plug-in will detect all Flows/presets that contain only one plug-in as a Single Plug-in Flow/preset.
- Added a Volume and Pan Utility module.
- Added two new Flow Packs: Red Cell and Safari Audio.
- Fixed some rare issues that could cause Flow Mixing Suite to crash when adding or removing instances.
Flow Mixing Suite and Flow Mastering Suite:
- The Flow Control editor menu has been redesigned and is no longer in beta. The new Flow Control editor opens on right-click on the Flow Controls.
- Added Flows that include Reference EQ 1956/1998 and Limit Pro/Go.
- Fixed an issue causing subscriptions to fail to renew if your account also had an expired, suspended subscription.
- Fixed an issue that could cause crashes with Flows containing Dimensions and/or Tape.
- Fixed an issue where searching for plug-ins in the Flow plug-ins with non-ASCII characters such as å, ä and ö could freeze your DAW.
- Fixed an issue that caused MIDI compatible modules (currently Vocoder and Vocal Tuner) to receive incorrect timed MIDI at 44.1 kHz and 48 kHz.
- Fixed an issue causing Weiss EQ MP settings to change when a project was reopened in Flow Mastering Suite.
Flow Studio:
- Added Lock Track feature. From the Flow Studio track selection menu, you can now press shift + OK, to lock Flow Studio to a track.
- Added a Flow Control menu on Flow Studio and provides basic control over Flow Controls from the HW. It is accessible by touching a Flow Control and pressing the action button simultaneously.
- The Flow selector on Flow Studio is reworked and can now browse Flow Packs, Flows by category, and also filter by vendor. Among other things.
- Flow Studio's VU meters now also work on tracks that have the Console 1 plug-in inserted, and vice versa.
- Added a setting to adjust the Extended Features output level from Flow Studio instead of DAW volume when in Flow mode.
- Added a setting for which Flow Studio meters should be available to screen readers.
- Fixed an issue that could cause some Flow Controls to be unreachable with Shift.
- Fixed an issue that could cause the On-Screen Display to show an erroneous low power warning.
- Fixed an issue causing Console 1 Mk II and Console 1 Compact to turn off their LEDs while the Omni was touched.
Parallels:
- Fixed a cosmetic issue causing the modulation source buttons (A, B, C and D), and other GUI elements, to be out of sync with the parameter they controlled.
Softube On-Screen Display:
The On-Screen Display is updated through Console 1 System or Flow Studio Suite products within Softube Central.
- Improved the MIDI port setup for Ableton Live and Bitwig Studio on Mac.
- Reset On-Screen Display now does a more thorough reset of the application.
- Meters from Ableton Live and Cubase now have higher resolution.
- Fixed the dead zone in the Tape/Preamp Headroom control to be centered on 0 dB.
- Fixed an issue in Ableton Live that could cause plug-in instances and favorites to end up on the wrong track.
- Output busses are now listed after the regular tracks.
- Fixed an issue that caused a frame rate drop when a Flow Mixing Suite plug-in window was placed behind the On-Screen Display.
- Fixed an issue that could cause the On-Screen Display to stop responding when connecting to an Apollo interface.
- Fixed some issues that could cause problems with track numbering in Ableton Live, for example, after deleting a return track.
- Fixed an issue causing wrong track colors in Console 1 for Bitwig Studio and Nuendo.
- Fixed an issue causing the American Class A curves to be missing in Logic Pro.
- Fixed an issue causing some presets to be missing from the preset list for plug-ins with many presets.
- Fixed an issue preventing the On-Screen Display from being properly installed unless you manually terminated a leftover instance of the application first.
- Fixed an issue that could cause a Console 1 / Flow Mixing Suite track to stay on the HW screens and in the On-Screen Display after the DAW project was closed.
- Fixed an issue that caused two tracks to be created in the On-Screen Display when placing both Console 1 and a Flow plug-in on the main track in Fender Studio Pro.
- Fixed an issue that could cause the On-Screen Display to crash when the hardware went to sleep.
- Fixed an issue that could cause the On-Screen Display to crash when connecting to Cubase.
Model 80 Five Voice Synthesizer
- Added Skylark Sounds "Funky Pop" preset pack.