Listing articles tagged Module

Showing items 1–10 of 33.

Go to index.php?id=modular_roli
module
ROLI Seaboard RISE

Use the innovative ROLI Seaboard RISE keyboard controller to interface with Modular and get access to five dimensions of touch. The ROLI Seaboard RISE module is an interface module featuring no less...

Go to index.php?id=modular_dual_pan
module
Dual Pan

Two channel, CV controllable panning module that can be used to place a mono signal in a stereo mix, or to use as an A/B switch. The panning curve uses a constant power pan law with a +3dB boost at...

Go to index.php?id=modular_dual_x-fade
module
Dual X-Fade

Two channel, CV controllable crossfade module that can be used to mix two mono signals with a CV controllable balance input. The crossfade curve response is linear with a -6 dB dip in the center.

Go to index.php?id=modular_doepfer_a110
module
Doepfer A-110 VCO

An voltage controlled oscillator is a tone generator, the most basic building block of a synthesizer. The Doepfer A-110 can generate four different waveforms, each with its distinctive own overtone...

Go to index.php?id=modular_switch_1_to_4
module
Switch 1 to 4

This CV controllable switch can be used to direct a CV source or audio signal to any of four different destinations.

Go to index.php?id=modular_doepfer_a118
module
Doepfer A-118 Noise

Module A-118 is a noise and random voltage generator. It produces three types of signal: white noise, colored noise, and random voltage. White and colored noise can be used as audio sources, and the...

Go to index.php?id=modular_envelope
module
Envelope Follower

This module can be used to generate control voltages from audio sources, but also as a simple ASR envelope.

Go to index.php?id=modular_doepfer_a147
module
Doepfer A-147 VCLFO

The Doepfer A-147 VCLFO ( (Voltage Controlled Low Frequency Oscillator) is a oscillator especially adapted to be used as a modulation source running at slow rate. It can be used to create trills...

Go to index.php?id=modular_signal_tool
module
Signal Tool

This module acts as a toolbox for continuous CV signals and does not differentiate between logic high and low like the logic tool. Its functions includes negative value, absolute value, minimum and...

Go to index.php?id=modular_daw_sync
module
DAW sync

This module is an efficient way of getting clock pulses in sync with your DAW. Connect the 16 notes output to click in on your sequencer module and the reset pulse out to reset in for the most common...

« PREVIOUS 1 2 3 4 NEXT »