Compression simplified.

  • A careful modeling of a hardware classic found in every top-notch studio worldwide​
  • Upgraded with an extra panel full of modern features, such as Low Cut Filter, Saturation Knob, and Parallel Inject​
  • Easy to use, always. The original was a cinch, and the plug-in keeps it simple so you can focus on the performance​

 


Console 1 ready

Summit Audio TLA-100A Compressor

USD 59 USD 199

 

A studio essential for four decades and counting, this classic compressor is all about gentle, natural-sounding gain reduction, sublime leveling, and ease of use. Everything you put into the TLA-100A comes out the other side sounding big yet compact. It effortlessly keeps the dynamics of your material controlled, without strangling the sound.

An exquisite emulation of the original 1980s hardware, the TLA-100A plug-in offers extras not previously available to the hardware user, such as a Low Cut filter, the Saturation knob, and Parallel Inject. The plug-in pluses take the TLA-100A to the next level while enshrining the warm, smooth sound of the original.

 

Invisible touch

The TLA-100A behaves similarly on all types of material. Its transparency and strong-but-gentle grab of the sound source make it a popular choice for placing vocals and bass just where they need to be in the mix.

 

You can do magic

The TLA-100A is tailor-made for softening a spiky acoustic guitar that demands too much attention or for providing some glue on a drum bus or a full mix.

 

extended-features-global-block-2.jpg

This product supports
Extended Features

We love VU meters, Bakelite knobs, and analog quirks. But we want modern precision and workflow. The answer? Softube Extended Features. Easy-access panels with the innovations you need close at hand

 

Learn more

 

"The Summit has been our go-to vocal limiter since it came out, and Softube has managed to capture every nuance of it with incredible detail."

Billy Bush
Studio and live engineer for Garbage, also worked with Foster the People, Muse, Beck and Offspring

Have a listen

Synchronicity

Debuted in the 1980s, the Summit Audio TLA-100A compressor has become a studio standard the world over. Softube partnered with Summit Audio to create a software version that is officially licensed and endorsed by the hardware designers. The plug-in holds on to the acclaimed personality and pleasant toastiness of the original—as well as the natural design of the controls and interface—all while keeping sound quality at the highest level possible. Just one reason why Summit Audio plug-ins are made exclusively by Softube.

Color by numbers

The Summit Audio TLA-100A works in a program dependent manner, meaning it does a lot of the thinking for you. Its success is due in large part to how tremendously easy it is to use. When modeling the original, we made sure to maintain all the components that make the TLA-100A so simple and smooth. It’s practically impossible to make it sound bad. Although, it will give you some soft and warm distortion if you drive it super hard.

Control

We wouldn’t be Softube if we didn’t squeeze in some features that make the software version a little more robust than the original TLA-100A. Peep the lower panel and you’ll find all the additions, including a Saturation Knob that lets you blend just the right amount of distortion into your signal, a Low Cut filter to flawlessly carve compression, and Parallel Inject that’s practically made for drum bus or mix bus.

"Softube has outdone itself. The TLA-100A plug-in is a testament to what can be achieved in hardware modeling when attention is paid to the smallest details of design."

Zach McNees
Rob Thomas, Pixies, Liars, Alice Cooper

Reviews

 

"This is more than just an excellent emulation of the TLA-100A hardware. While it's very, very similar in terms of sound quality, the addition of those 'modern' features takes it to new heights, arguably making it better than the original. Good work, Softube!"
4.5/5

MusicRadar
READ FULL REVIEW

 

Console 1 Ready

This plug-in can be used within Console 1, our mixing system. Click to learn more.

In short

  • Officially licensed and created in partnership with Summit Audio
  • Every single component expertly modeled
  • Mild authority with which to control your audio dynamics
  • Modeled output distortion, easily controlled with the saturation knob.
  • Extremely analog behavior of frequencies, phase, distortion, attack, release, etc.
  • Built-in parallel compression
  • Detector filtering (a Low Cut filter that’s switchable to signal input)
  • Absurdly easy to use
  • Modeled output distortion that’s easily controlled with the saturation knob
  • System requirements

    • Monterey 12, Ventura 13, Sonoma 14
    • Windows 10 (64-bit), Windows 11
    • Softube account
    • iLok account
    • Computer with AU, VST, VST3 and/or AAX compatible DAW host software
    • Internet access (for downloading installers and managing licenses)

    Read full System Requirements and our Terms and Conditions 

Can't find what you are looking for? Support